DN 65, PN 40; housing stainless steel 1.4408 / A 351 CF8M, flanges, raised face, Form B1 DIN EN 1092-1; Equal percentage characteristic; nominal stroke 15 mm; cone sealing edge metallic (leakage class IV); cone material 1.4404 / 1.4409; Seat Material 1.4404 / 1.4409; seat edge metallic; Kv-value 60 / Cv 70, packing PTFE carbon, spring-loaded; housing gasket graphite seal ring met. Carrier CrNiMo; connection diameter 30 mm, with upper part made ​​of stainless steel

NPS 1 1/2; ANSI Class 150, cast steel housing 1.0619 / A 216 WCC; flanges RF - Raised Face, roughness Ra 3.2 ... 6.3 microns; Equal percentage characteristic; nominal stroke 15 mm; cone sealing edge metallic (leakage class IV) , cone material 1.4404 / 1.4409; seat Material 1.4006; seat edge metallic; Kv value 16 / Cv 20, packing PTFE carbon, spring-loaded; housing gasket graphite seal ring met. Carrier CrNiMo; connection diameter 30 mm; shell for housing made ​​of carbon steel

Stainless steel seat and actuator bellows, brass plug with FPM soft sealing; Kvs 5.0 / Cv 6.0; Perm. differential pressure 16 bar / 230 psi; Balancing bellows made of 1.4571; Plug stem seal made of FPM (oil-resistant)

NPS 1, ANSI Class 150, cast steel housing 1.0619 / A 216 WCC;
RF Flanges - Raised Face, roughness Ra 3.2 ... 6.3 microns; characteristic
equal percentage; nominal stroke 15 mm; cone sealing edge metallic
(Leakage class IV); cone material 1.4404 / 1.4409; Seat Material
1.4006; seat edge metallic; Kv-value 10 / Cv value 12; pack
PTFE carbon, spring-loaded; housing gasket graphite seal ring with
met. Carrier CrNiMo; connection diameter 30 mm, with upper part of
Housing made of carbon steel

NPS 3, ANSI Class 300, Steel casting 1.0619 / A 216 WCC; flanges RF - Raised Face, roughness Ra 3.2 ... 6.3 microns; Equal percentage characteristic; nominal stroke 15 mm; cone sealing edge metallic (leakage class IV); cone material 1.4006 , seat Material 1.4006; seat edge metallic; Kv-value 80 / Cv 95, packing PTFE carbon, spring-loaded; housing seal graphite seal ring met. carrier CrNiMo; connection diameter 30 mm; Upper section for housing made ​​of carbon steel

Housing for carrier rail mounting, top hat rail 35 mm according to DIN EN 60715;
with i / p module type 6112;
Input 4 .. 20 mA (with switch-off electronic); amplifier I; Unit H: Starting point 0.1 ... 1.2 bar, delta p 5.94 ... 8.00 bar; Effective direction increasing / increasing, pneumatic connection: hose connection for hose 4x1 mm, electrical connection: terminals for wires 0.5 to 2.5 mm²; IP 20

Stroke 15 mm; membrane area 700 cm ²; membrane material NBR; signal pressure connection ISO 228-1 G thread; bench range 0.4 ... 2.0 bar; elastic force: actuator stem extends; operating range 1.6 ... 2.4 bar

Housing unit for rail mounting, top-hat rail 35 mm acc. to DIN EN 60715; With Type 6109 i/p Module; Input 4 to 20 mA (with switch-off electronic function); Booster I; Output 0.2 to 1.0 bar; Operating direction: increasing/increasing; Pneumatic connection ISO-228/1 - G 1/8 female thread; Electrical connection terminals for 0.5 to 2.5 mm² wires; Degree of protection IP 20

Supply Pressure Regulator
Type 4708-11 Supply Pressure Regulator;
Connection thread ISO
228/1, G 1/4; Set point range 0.5...6.0 bar,
with pressure gauge
(connection nickel-plated brass); With 1
pressure gauge; Aluminum
connecting part; Filter in transparent plastic
receptacle; Packed;
Var-ID: 1607824

Without explosion protection; Limit switch: Inductive proximity
switch SJ 3,5 SN (-45 to +80 °C); Two contacts; Angle of rotation: <
100° adjustable; Electrical connection: Terminals/2 black cable
glands M20x1.5, min. -20 °C; Degree of protection: IP 65, with filter
check valve made of polyamide (min. -20 °C); Permissible ambient
temperature: -20 to +80 °C (+60 °C for T6);
Var-ID: 1537296

Electropneumatic Positioner
Type 3730-3 with LCD and AUTOTUNE, 4 to
20 mA reference
variable, HART communication, 2 software
limit switches/1 fault
alarm contact; EXPERTplus diagnostics;
Packed; Hardware
version device index 01; Software version
1.55;
Var-ID: 3706017
(3705551)

9,1)
Type 3241 Valve
DN 50; Body: Stainless steel 1.4408/A 351 CF8M; PN 40; Flanges
with raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 15 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4404/1.4409; Seat material
1.4404/1.4409; Seat with metal sealing; Kvs 40/Cv 47; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of
CrNiMo steel
Var-ID: 1936286
-----------------------------------------------------------------
9,2)
Type 3271 Pneumatic Actuator
With top-mounted handwheel; 15 mm operating travel; Diaphragm
area 120 cm²; Diaphragm material NBR; Loading pressure
connection: ISO 228-1 G thread; Bench range 2.1 to 3.3 bar;
Fail-safe action: Actuator stem extends
Var-ID: 1006140
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
9,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
9,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
9,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

8,1)
Type 3241 Valve
DN 32; Body: Cast steel 1.0619/A 216 WCC; PN 40; Flanges with
raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 15 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4404/1.4409; Seat material 1.4006; Seat
with metal sealing; Kvs 16/Cv 20; Packing PTFE-carbon,
spring-loaded; Body gasket: Graphite seal on CrNiMo steel core;
Connecting diameter 30 mm; Bonnet for body made of C steel
Var-ID: 1076510
-----------------------------------------------------------------
8,2)
Type 3271 Pneumatic Actuator
15 mm operating travel; Diaphragm area 240 cm²; Diaphragm
material NBR; Loading pressure connection: ISO 228-1 G thread;
Bench range 0.2 to 1.0 bar; Fail-safe action: Actuator stem retracts
Var-ID: 1005111
*Valve OPEN without auxiliary power
-----------------------------------------------------------------
8,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
8,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
8,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

6,1)
Type 3241 Valve
DN 25; Body made of forged steel/bar stock 1.0460/A 105; PN 40;
Flanges with raised face, Form B1 DIN EN 1092-1; Equal
percentage characteristic; 15 mm rated travel; Plug with metal
sealing (leakage class IV); Plug material 1.4404/1.4409; Seat
material 1.4006; Seat with metal sealing; Kvs 10/Cv 12; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet for body
made of C steel
Var-ID: 1104314
-----------------------------------------------------------------
6,2)
Type 3271 Pneumatic Actuator
15 mm operating travel; Diaphragm area 240 cm²; Diaphragm
material NBR; Loading pressure connection: ISO 228-1 G thread;
Bench range 0.2 to 1.0 bar; Fail-safe action: Actuator stem retracts
Var-ID: 1005111
*Valve OPEN without auxiliary power
-----------------------------------------------------------------
6,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
6,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
6,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

5,1)
Type 3241 Valve
DN 50; Body: Cast steel 1.0619/A 216 WCC; PN 40; Flanges with
raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 15 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4006; Seat material 1.4006; Seat with
metal sealing; Kvs 40/Cv 47; Packing PTFE-carbon, spring-loaded;
Body gasket: Graphite seal on CrNiMo steel core; Connecting
diameter 30 mm; Bonnet for body made of C steel
Var-ID: 1027250
-----------------------------------------------------------------
5,2)
Type 3271 Pneumatic Actuator
15 mm operating travel; Diaphragm area 240 cm²; Diaphragm
material NBR; Loading pressure connection: ISO 228-1 G thread;
Bench range 0.6 to 3.0 bar; Fail-safe action: Actuator stem
extends; Operating range 0.9 to 3.3 bar
Var-ID: 1005195
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
5,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
5,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
5,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

4,1)
Type 3241 Valve
DN 40; Body: Cast steel 1.0619/A 216 WCC; PN 40; Flanges with
raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 15 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4006; Seat material 1.4006; Seat with
metal sealing; Kvs 25/Cv 30; Packing PTFE-carbon, spring-loaded;
Body gasket: Graphite seal on CrNiMo steel core; Connecting
diameter 30 mm; Bonnet for body made of C steel
Var-ID: 1021300
-----------------------------------------------------------------
4,2)
Type 3271 Pneumatic Actuator
15 mm operating travel; Diaphragm area 240 cm²; Diaphragm
material NBR; Loading pressure connection: ISO 228-1 G thread;
Bench range 0.6 to 3.0 bar; Fail-safe action: Actuator stem
extends; Operating range 0.9 to 3.3 bar
Var-ID: 1005195
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
4,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
4,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
4,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

3,1)
Type 3241 Valve
DN 125; Body: Cast steel 1.0619/A 216 WCC; PN 40; Flanges with
raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 30 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4006; Seat material 1.4006; Seat with
metal sealing; Kvs 200/Cv 235; Packing PTFE-carbon,
spring-loaded; Body gasket: Graphite seal on CrNiMo steel core;
Connecting diameter 30 mm; Bonnet for body made of C steel
Var-ID: 1021286
-----------------------------------------------------------------
3,2)
Type 3271 Pneumatic Actuator
30 mm operating travel; Diaphragm area 700 cm²; Diaphragm
material NBR; Loading pressure connection: ISO 228-1 G thread;
Bench range 2.1 to 3.3 bar; Fail-safe action: Actuator stem extends
Var-ID: 1005063
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
3,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
3,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
3,5)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388

13,1)
Type 3241 Valve
DN 100; Body: Cast iron EN-JL1040/A 126 B/FC 250; PN 16;
Flanges with raised face, Form B DIN EN 1092-2; Equal
percentage characteristic; 30 mm rated travel; Plug with metal
sealing (leakage class IV); Plug material 1.4006; Seat material
1.4006; Seat with metal sealing; Kvs 160/Cv 190; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet for cast
iron body
Var-ID: 1021273
-----------------------------------------------------------------
13,2)
Type 3271 Pneumatic Actuator
With top-mounted handwheel; 30 mm operating travel; Diaphragm
area 700 cm²; Diaphragm material NBR; Loading pressure
connection: ISO 228-1 G thread; Bench range 2.1 to 3.3 bar;
Fail-safe action: Actuator stem extends
Var-ID: 1005470
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
13,3)
Type 4763 Electropneumatic Positioner
Lever I (length 40 to 127 mm); Spring 2 (30 mm travel, split range
15 mm); Pneumatic connections ISO 228/1 - G 1/4; Electrical
connection: Cable gland M20 x 1.5, black (plastic); Type 6109 i/p
Module ; Reference variable 4-20 mA
Var-ID: 1008579
-----------------------------------------------------------------
13,4)
Mounting unit for Type 4763 / 4765
Consisting of:; Mounting parts acc. to NAMUR for valves with cast
yokes (1400-5745); Direction of action: Increasing/increasing;
Metric piping, zinc-plated steel, Ermeto screw fitting
Var-ID: 1012389
-----------------------------------------------------------------
13,5)
Type 4708 Supply Pressure Regulator
Type 4708-11 Supply Pressure Regulator; Connection thread ISO
228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure gauge
(connection nickel-plated brass); With 1 pressure gauge; Aluminum
connecting part; Filter in transparent plastic receptacle
Var-ID: 1604789
-----------------------------------------------------------------
13,6)
Mounting unit for Type 4708
For Type 4708-11; Control valve attached over stainless steel
bracket, material 1.4301/AISI 304; Metric piping, zinc-plated steel,
Ermeto screw fitting
Var-ID: 1594793

12,1)
Type 3241 Valve
DN 80; Body: Cast iron EN-JL1040/A 126 B/FC 250; PN 16;
Flanges with raised face, Form B DIN EN 1092-2; Equal
percentage characteristic; 15 mm rated travel; Plug with metal
sealing (leakage class IV); Plug material 1.4006; Seat material
1.4006; Seat with metal sealing; Kvs 80/Cv 95; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet for cast
iron body
Var-ID: 1021195
-----------------------------------------------------------------
12,2)
Type 3271 Pneumatic Actuator
With top-mounted handwheel; 15 mm operating travel; Diaphragm
area 350 cm²; Diaphragm material NBR; Loading pressure
connection: ISO 228-1 G thread; Bench range 1.4 to 2.3 bar;
Fail-safe action: Actuator stem extends
Var-ID: 1005468
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
12,3)
Type 4763 Electropneumatic Positioner
Lever I (length 40 to 127 mm); Spring 1 (15 mm travel); Pneumatic
connections ISO 228/1 - G 1/4; Electrical connection: Cable gland
M20 x 1.5, black (plastic); Type 6109 i/p Module ; Reference
variable 4-20 mA
Var-ID: 1008578
-----------------------------------------------------------------
12,4)
Mounting unit for Type 4763 / 4765
Consisting of:; Mounting parts acc. to NAMUR for valves with cast
yokes (1400-5745); Direction of action: Increasing/increasing;
Metric piping, zinc-plated steel, Ermeto screw fitting
Var-ID: 1012389
-----------------------------------------------------------------
12,5)
Type 4708 Supply Pressure Regulator
Type 4708-11 Supply Pressure Regulator; Connection thread ISO
228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure gauge
(connection nickel-plated brass); With 1 pressure gauge; Aluminum
connecting part; Filter in transparent plastic receptacle
Var-ID: 1604789
-----------------------------------------------------------------
12,6)
Mounting unit for Type 4708
For Type 4708-11; Control valve attached over stainless steel
bracket, material 1.4301/AISI 304; Metric piping, zinc-plated steel,
Ermeto screw fitting

11,1)
Type 3241 Valve
DN 65; Body: Cast iron EN-JL1040/A 126 B/FC 250; PN 16;
Flanges with raised face, Form B DIN EN 1092-2; Equal
percentage characteristic; 15 mm rated travel; Plug with metal
sealing (leakage class IV); Plug material 1.4006; Seat material
1.4006; Seat with metal sealing; Kvs 60/Cv 70; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet for cast
iron body
Var-ID: 1021242
-----------------------------------------------------------------
11,2)
Type 3271 Pneumatic Actuator
With top-mounted handwheel; 15 mm operating travel; Diaphragm
area 350 cm²; Diaphragm material NBR; Loading pressure
connection: ISO 228-1 G thread; Bench range 1.4 to 2.3 bar;
Fail-safe action: Actuator stem extends
Var-ID: 1005468
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
11,3)
Type 3725 Electropneumatic Positioner with LCD and AUTOTUNE,
4...20 mA reference variable
Hardware version: Device index 00; Software version V 1.11
Var-ID: 4098517
-----------------------------------------------------------------
11,4)
Mounting kit for Type 3725
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 (1402-0330); Pneumatic connecting plate G 1/4
(1402-0235); Metric piping, zinc-plated steel, Ermeto screw fitting
Var-ID: 3327691
-----------------------------------------------------------------
11,5)
Type 4708 Supply Pressure Regulator
Type 4708-11 Supply Pressure Regulator; Connection thread ISO
228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure gauge
(connection nickel-plated brass); With 1 pressure gauge; Aluminum
connecting part; Filter in transparent plastic receptacle
Var-ID: 1604789
-----------------------------------------------------------------
11,6)
Mounting unit for Type 4708
For Type 4708-11; Control valve attached over stainless steel
bracket, material 1.4301/AISI 304; Metric piping, zinc-plated steel,
Ermeto screw fitting
Var-ID: 1594793

10,1)
Type 3241 Valve
DN 65; Body: Stainless steel 1.4408/A 351 CF8M; PN 40; Flanges
with raised face, Form B1 DIN EN 1092-1; Equal percentage
characteristic; 15 mm rated travel; Plug with metal sealing (leakage
class IV); Plug material 1.4404/1.4409; Seat material
1.4404/1.4409; Seat with metal sealing; Kvs 60/Cv 70; Packing
PTFE-carbon, spring-loaded; Body gasket: Graphite seal on
CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of
CrNiMo steel
Var-ID: 1971756
-----------------------------------------------------------------
10,2)
Type 3271 Pneumatic Actuator
With top-mounted handwheel; 15 mm operating travel; Diaphragm
area 350 cm²; Diaphragm material NBR; Loading pressure
connection: ISO 228-1 G thread; Bench range 1.4 to 2.3 bar;
Fail-safe action: Actuator stem extends
Var-ID: 1005468
*Valve CLOSED without auxiliary power
-----------------------------------------------------------------
10,3)
Type 3730 Electropneumatic Positioner
Type 3730-2 with LCD and AUTOTUNE, 4 to 20 mA reference
variable, 2 software limit switches/1 fault alarm contact;
EXPERTplus diagnostics; Hardware version device index 01;
Software version 1.55
Var-ID: 3706116
-----------------------------------------------------------------
10,4)
Mounting unit for Type 3730
Consisting of:; Mounting parts for linear actuators acc. to IEC
60534-6 to Type 3271 up to 700 cm² (1400-7454); Metric piping,
zinc-plated steel, Ermeto screw fitting
Var-ID: 1112747
-----------------------------------------------------------------
10,50)
Type 4708 Supply Pressure Regulator
Type 4708-53 Supply Pressure Regulator, for mounting to Types
373x/376x/378x Positioners (linear actuators); Connection thread
ISO 228/1, G 1/4; Set point range 0.5...6.0 bar, with pressure
gauge (connection nickel-plated brass); With 2 pressure gauges;
Aluminum connecting part; Filter in black plastic regulator body
Var-ID: 1605388